Note that this product works with both OKI’s PCL/Postscript and GDI printers whereas most USB Print Servers only work with PCL/Postscript printers. Silex SX-2500CG Wireless Ethernet Adapter Problems found using these devices must be raised with the manufacturer or supplier and not with OKI Systems (UK) Ltd. Note that many other devices are available which will do the same thing. This is done in the same way as connecting a wireless adapter as described in section 1.2.īelow are links to tested devices. Note also that you can use this method to connect an MFP but most print servers do not support scanning.Ĭonnect the print server to the printer via a USB cable and then connect the print server to the network wirelessly via the wireless access point. Note that most print servers only support OKI PCL/Postscript printers and not GDI although the one referenced in section 3 supports both. If your printer doesn’t have a built in network port you can still connect it to the network using a wireless USB print server. Once the connection has been made, the printer or MFP is then on the network.Īs with the PowerLine connection, if you connect an MFP using this method, as well as printing, it still has all its network scanning functions available.Ģ.0 Connecting a printer which only has a USB port
#Oki b4600 pcl 2 sided printer how to#
Full instructions on how to set up the connection are provided by the manufacturer. The mobile print application by oki will print pdfs, photos and web pages from your tablet or smartphone to oki printers and multi-function devices. Check to be located under a number of functions.
#Oki b4600 pcl 2 sided printer password#
This can be done using the WPS (Wi-FI Protected Setup) button on the adapter if the Wi-FI Access Point supports this or by entering the network details and password manually. This printer is perfect for you who want to start the printing business in micro scale. Connect the wireless adapter to the printer’s network port using a network cable and then connect the adapter wirelessly to the network. If you connect an MFP using this method, as well as printing, it still has all its network scanning functions available.Ī wireless adapter allows the printer or MFP to be connected to the network wirelessly. Your printer or MFP is now on the network. They will automatically detect one another and form a network between themselves using your existing mains wires.Įach PowerLine adapter has a network port so you connect a network cable from one adapter to the router and the other adapter to the printer or MFP as shown in the diagram below. One adapter plugs in near your router and the other near your printer or MFP. You need a minimum of two adapters to plug into your 3 pin mains sockets.
PowerLine network adapters use the mains wiring to extend the network. The two sections below describe how to connect a printer or MFP with a built in network port to your network when there is no convenient network point to connect it to. This article describes ways to connect an OKI printer or Multifunction Printer (MFP) to a network when there is no convenient access to a wired network point.ġ.0 Connecting a printer or MFP which has a built in network port How to connect an OKI printer or MFP to a network wirelessly or by utilising mains wiring
0 kommentar(er)
